MMV Studio

Bespoke living-room furniture in Barcelona

We can assist you inEspañolEnglishDeutschРусский

Designed for the space, specified for use and fitted on site

A living room unit is seen from the sofa, dining table and entrance. Before filling a wall, we decide what needs a door, what should remain visible and where connected devices will go.

Survey and fitting in BarcelonaHomes and professional spaces
Designed for your space

A proposal that fits your space

We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.

01

Proportion within the room

We compare a partial composition with a continuous front before choosing.

02

Open where useful

Shelves show the things you want to see; less attractive storage stays behind doors.

03

Materials beside what remains

Samples are viewed next to the floor, table and real room light.

04

Components that can reach the room

Doors and lift dimensions affect how each unit is made and brought upstairs.

Our process

How we work, step by step

These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.

  1. Initial estimate

    Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.

  2. Measured survey

    At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.

  3. Design, when required

    If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.

  4. Detailed quotation

    With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.

  5. Approval and deposit

    You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.

  6. Workshop production

    We cut, finish and prepare the components according to the approved drawings and dimensions.

  7. Fitting on site

    The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.

  8. Review with you

    Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.

Profile image for Joaquín Pardo
Joaquín PardoYour contact in Barcelona
Your project starts here

Give every centimetre a purpose.

I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.

No obligation. Rough measurements are enough to get started.

Solutions for your space

A wall need not be filled end to end

A full wall unit, separate modules and a freestanding sideboard each change light, circulation and capacity differently.

01

Television at a useful height

Its place follows the sofa and viewing distance, rather than the geometric middle of the wall.

02

Support for books

Shelf span and thickness follow the expected load to prevent sagging.

03

Tableware near the table

A sideboard can share a finish with a TV unit without copying its depth or doors.

04

Serviceable cables

Sockets, router and ventilation remain reachable so a device can change without dismantling the furniture.

Three ways to approach the specification

Scope and budget decisions

These are not fixed packages: the choice depends on what should be kept, made and fitted.

Practical wall01

Organise what you use every day

Combine reachable drawers with ventilated equipment space without filling the whole wall.

  • List of devices and books
  • Sockets and cables located
  • Depth checked against the walkway
Special joinery03

Integrate awkward features

A fireplace, doorway or home work area changes how the cabinet runs are divided.

  • Fixing details
  • Ventilation where needed
  • Technical access retained
A detailed quotation

What we need to know about the living room

Wall width alone does not tell us where the screen is viewed or what you prefer to hide. A short list of uses makes the furniture easier to plan.

Example of bespoke living-room furniture in Barcelona
01

View from the sofa

Photograph the whole wall and note approximate seating distance and screen height.

02

Devices and connections

List what goes inside, where sockets are and whether equipment needs ventilation or regular access.

03

Things to store

Books, tableware and display objects call for different depths, supports and fronts.

04

Furniture staying put

Show the dining table, sofa, radiator and joinery so the new volume does not obstruct circulation.

From early guidance to a final figure

From enquiry to a confirmed proposal

01First review

We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.

02Detailed quotation

The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.

Send what you already have. We can identify the next useful photograph, measurement or decision.

Send photographs and dimensions → Send via WhatsApp
Illustrative material detail for bespoke living-room furniture
Materials and details

Living-room finishes depend on what they support

A shelf for books, a low cabinet door and a display case do not require identical construction.

Loaded shelvesSpan, thickness and supports follow the weight of books or objects.
Low frontsThe surface is judged beside flooring and against everyday contact.
Display caseGlass, hardware and lighting are specified if objects need protected display.
Device bayBacking and ventilation allow a cable to be checked or equipment changed.

Confirm the sample in the living room beside the floor and furniture that will remain.

Before deciding

Questions before you enquire

Can the television sit outside the furniture?+

Yes. We can fit low or side storage alone, while keeping connections and ventilation accessible.

Will open bookshelves collect dust?+

That depends on how much you want to display. Some areas can be closed while frequently used shelves stay open.

Can new units work with an existing dining table?+

Yes. We check heights, timber tones and proportions with photographs and samples before approving finishes.

Start with the details you have

Send the details you have

We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.

  1. 01 We review the scope of your idea
  2. 02 We identify dimensions still needed
  3. 03 Materials and fitting are specified before you order
Send by WhatsApp

No obligation. Approximate measurements are enough for an initial conversation.

Guided enquiry

Tell us what you have in mind

You do not need finished drawings. Your photos and rough measurements are enough to start a conversation.

Step 1 of 6 · Project

What piece of furniture do you need?

Select the type of commission; there is room to explain the space later.

Project type
Step 1 of 6

Living room furniture in Barcelona: display and storage

A living room unit may hold a screen, books, tableware and things best hidden. We allocate those uses before drawing the front and leave comfortable routes around sofa and table.

Equipment needs airflow and access to sockets and cables. A closed unit must still let you remove or replace a device without dismantling the furniture.

Long shelves need suitable thickness and support for their load. We compare finishes against flooring, walls and existing pieces in the room’s own light.

Send a straight-on view and one from the seating area, wall dimensions and the equipment to integrate. We can then discuss a layout before measuring.