Opening measured
Levels and existing features are checked.
MMV Studio
Bespoke interior joinery in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
A door, wall panel and stair do not use the same joint. Bespoke joinery starts with function, supporting wall and the features that must remain, then resolves each junction.
Designed for your space
Junctions reveal the quality of joinery
Timber meeting an uneven wall, radiator or existing door needs its own detail. We check dimensions and support before choosing fixings and edges.
Joint planned
Connections are drawn before workshop work.
Use defined
Doors, seats and shelves carry different loads.
Fitting feasible
Access and component sizes are considered.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
From drawing to the part you touch
The maker needs to know where each piece ends and how adjoining parts move. We review openings, access panels, edges and upkeep before production.
Wall panelling
Corners, service access and concealed doors are resolved.
Stairs
Treads and under-stair storage follow the existing structure.
Doors
Clearance and ironmongery suit the measured opening.
Fixed furniture
Units follow contents, wall and fitting route.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke interior joinery
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Oak living-room joineryShelves and doors follow contents and the supporting wall.
Walnut-clad island and tall unitsIsland and tall units are coordinated with devices and services.
Home office integrated into a storage wallFiling covers the wall without invading chair space.
Oak wardrobe and deskWardrobe door and desk retain compatible openings.
Oak staircase with under-stair storageStair function comes before use of space below.
Walnut panelling with a concealed doorAccess points remain reachable behind panelling.
Oak pocket sliding doorA sliding leaf needs defined travel and guide.
Bookcase built around an archwayThe arch is measured to lay out shelf joints.
Slatted divider with a pivoting panelA moving panel needs planned support and swing.
Timber doors for a traditional homeNew doors follow the measured existing openings.
Curved walnut bar cabinetThe bar’s curve is detailed with its hinges.
Floating oak bathroom vanityBasin and wall set fixings and service access.
Folding timber and glass partitionA folding partition parks without closing passage.
Curved staircase with an oak handrailHandrail and treads are considered together.
Restored window with shutters and benchRepair follows an inspection of timber condition.
Dining bench with panelling and ventilationA bench must leave heater airflow and access.
Three ways to approach the specification
Each piece calls for a different detail
The finished appearance depends on joints, tolerance and fitting method.
Wall01
Clad while retaining access
Panels and openings follow existing services.
- Support reviewed
- Joints laid out
- Access preserved
Passage02
Open and close properly
The leaf is specified with its opening, swing and hardware.
- Levels measured
- Clearance planned
- Handle positioned
Use03
Carry daily life
Seating, shelves and fronts are designed for intended loads.
- Contents known
- Suitable fixings
- Maintainable parts
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Bespoke joinery questions
Can you work around an irregular opening?＋
Yes, once it is measured and suitable fixing points are checked.
Can doors blend into wall panelling?＋
Yes, provided clearance, hinges, handle and any required access are resolved.
Do you repair existing woodwork?＋
Send photographs; condition and availability of parts determine what can be done.
Start with the details you have
Show us the detail to resolve
Send full and close-up views of the opening, door or wall. Mark services, radiators and pieces that must remain.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke joinery: junctions belong on the drawing
Doors, panelling and furniture should meet at agreed joints, heights and thicknesses. We review them together to avoid improvised trim at the end of a build.
Board, veneer or solid timber depends on the component and its use. A vertical surface does not carry the same load as a shelf or door.
We check walls, floor, ceiling and fixing points before manufacture. Where other trades are involved, we agree when the supports must be ready.
Share drawings, photographs and a component list. The proposal will state what we survey, make and fit, and what falls outside our scope.