Full travel drawn
The leaf is shown both open and closed.
MMV Studio
Custom sliding doors in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
Before choosing a sliding leaf, decide where it will park when open. Wall, track, handle and mechanism access are planned together.
Designed for your space
A sliding door needs somewhere to go
Saving door swing helps only if the leaf can travel without covering sockets, furniture or access panels. We measure the opening and full travel before selecting track and material.
Wall checked
Construction and services affect a pocket-door option.
Track suits weight
Hardware and leaf are specified together.
System accessible
Adjustment and maintenance remain possible.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Pocket or surface mounted means different work
A pocket leaf frees visible wall but needs a suitable partition. A visible track avoids opening it but uses wall space alongside.
Small bathroom
It frees the swing by a basin if a suitable parking area exists.
Kitchen and dining
One or two leaves follow the clear opening wanted between rooms.
Glazed study
Visibility and glass are chosen without making an unspecified acoustic promise.
Wardrobe
Overlapping leaves limit how much of the interior opens at once.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of custom sliding doors
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Leaf within a partitionThe side void is checked before assigning it to the door.
Moving wardrobe frontsOverlapping leaves do not expose the entire interior at once.
Glass toward a studyDaylight passes through; privacy and sound need different specifications.
Two leaves by the kitchenEach needs parking space for the intended clear passage.
Bathroom pocket doorSpace by the basin improves only if the wall suits the system.
A wider passageHandle and threshold follow the people using the door.
Exposed timber trackThe parking wall must stay free of switches and furniture.
Travel along a curveSegments and guide need a route checked on site.
Leaf below a roof slopeChanging height is measured along the entire track.
Sliding slatsThe visual screen moves without stopping all daylight.
Grain joined to the wallPanelling continues when closed while hardware stays accessible.
Two symmetrical leavesStops and centre meeting set the final opening width.
Reeded glassLight passes through while views between rooms soften.
Metal and timberLeaf weight and track are specified together before fitting.
Moving panels in a shopEach follows the premises’ opening routine.
Large walnut and glass leafTransport, weight and track adjustment are reviewed together.
Three ways to approach the specification
Choose the leaf travel
Wall construction and use determine the system alongside appearance.
Visible01
Track on the wall
The leaf runs along a wall that must stay free of obstructions.
- Side wall available
- Track serviceable
- Handle reachable
Pocket02
Leaf inside the partition
Requires a suitable void and coordination with existing services.
- Thickness checked
- Electrical points located
- System accessible
Double03
Two leaves for a wider passage
Each needs parking length and a properly detailed central meeting.
- Clear opening measured
- Stops included
- Weight per leaf specified
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Before fitting a sliding door
Can a pocket door go into any wall?＋
No. Thickness, structure and services must be assessed before opening a partition.
Will it soundproof like a hinged door?＋
That depends on the system, seals and latch. A specific acoustic goal calls for a specified solution.
What happens to a nearby switch?＋
We mark outlets, controls and furniture along the leaf’s travel before approval.
Start with the details you have
Photograph the wall on both sides of the opening
Add dimensions, nearby outlets and preferred direction of travel. Say whether the partition can be altered.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Sliding doors: room for the leaf to travel
A sliding door removes the swing but needs a wall or pocket to travel into. We check switches, radiators and furniture along that route.
Exposed and pocket tracks differ in building work and maintenance. Wall type and future access to the mechanism guide the choice.
Door weight sets the hardware, fixing and stability requirements. We also define closing, handle and the actual clear opening.
Send views of both sides of the opening and rough dimensions. Wall, floor and lintel are checked before a system is specified.