MMV Studio

Flush doors and concealed frames in Barcelona

We can assist you inEspañolEnglishDeutschРусский

Designed for the space, specified for use and fitted on site

A flush door loses its effect when wall, frame and leaf are prepared separately. We coordinate thicknesses, hinges and finish from the opening outward.

Describe my project → Request a quote WhatsApp

Survey and fitting in BarcelonaHomes and professional spaces

Designed for your space

A flush door still needs room to move

Aligning leaf and wall means detailing frame, hinges, skirting and joints. The continuous finish is planned alongside the swing and access to the room behind.

Wall plane measured

Thickness, plumb and covering are checked.

Swing without conflict

The leaf keeps its travel and room access.

Joints designed

Perimeter and skirting are detailed before fitting.

Compatible finish

Paint, veneer or panels follow the leaf and its use.

Our process

How we work, step by step

These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.

Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.

Joaquín PardoYour contact in Barcelona

Your project starts here

Give every centimetre a purpose.

I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Solutions for your space

Visual continuity with a working door

A flush leaf can take wall paint or continue panelling, but it still needs a joint and a way to open.

Painted wall

Frame and leaf are prepared for the same finish, with visible joints assessed.

Timber panelling

Grain aligns while allowing the leaf to move and its edges to be finished.

Pantry or dressing room

Access stays discreet without losing opening clearance.

Full-height opening

Weight and hinges are checked against the actual support before approving size.

Instagram

A closer look at our studio

Examples of flush doors and concealed frames

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Flush doors and concealed frames in Barcelona: white like the wall — 01
**White like the wall**The joint still reveals access even when leaf and wall share colour.

Flush doors and concealed frames in Barcelona: continuous walnut grain — 02
**Continuous walnut grain**Leaf is laid out with panels but retains independent movement.

Flush doors and concealed frames in Barcelona: grey-green painted wall — 03
**Grey-green painted wall**Concealed frame and paint require a precise site junction.

Flush doors and concealed frames in Barcelona: pantry among tall cabinets — 04
**Pantry among tall cabinets**Handle and swing must work between kitchen units.

Flush doors and concealed frames in Barcelona: floor-to-ceiling door — 05
**Floor-to-ceiling door**Extra height calls for weight and hardware checks before making.

Flush doors and concealed frames in Barcelona: access within a bathroom — 06
**Access within a bathroom**Finish and joints follow actual water exposure.

Flush doors and concealed frames in Barcelona: study behind a wall — 07
**Study behind a wall**The latch can suit privacy without an untested sound claim.

Flush doors and concealed frames in Barcelona: busy hotel corridor — 08
**Busy hotel corridor**A discreet front still needs signage and suitable hardware.

Flush doors and concealed frames in Barcelona: integrated bedroom access — 09
**Integrated bedroom access**Privacy follows leaf, seals, frame and wall together.

Flush doors and concealed frames in Barcelona: skirting across the opening — 10
**Skirting across the opening**The lower junction includes necessary swing clearance.

Flush doors and concealed frames in Barcelona: slats across a leaf — 11
**Slats across a leaf**Timber continuity is coordinated with weight and hinges.

Flush doors and concealed frames in Barcelona: wallpaper continuing across — 12
**Wallpaper continuing across**The pattern aligns without covering the moving joint.

Flush doors and concealed frames in Barcelona: mineral finish by a suite — 13
**Mineral finish by a suite**The surface must allow the leaf to move.

Flush doors and concealed frames in Barcelona: two balanced accesses — 14
**Two balanced accesses**Each retains its own swing despite symmetrical appearance.

Flush doors and concealed frames in Barcelona: gently curving wall — 15
**Gently curving wall**Special frame and leaf follow geometry taken on site.

Flush doors and concealed frames in Barcelona: stone beside walnut — 16
**Stone beside walnut**Weight and material junction are calculated before the leaf is approved.

Three ways to approach the specification

What sort of continuity is needed?

Concealing a painted access differs from carrying timber across it.

Painted01

Leaf in the wall plane

Frame and skirting meet a door in the wall colour.

Perimeter joint defined
Opening direction
Decorating coordinated

Panelled02

Grain and wall pattern continue

The wall layout crosses the leaf visually without stopping its movement.

Panel divisions aligned
Hinges planned
Hardware accessible

Special03

Height or unusual shape

Format, support and transport are verified before a large or irregular leaf is made.

Weight considered
Suitable frame
Fitting sequence planned

A detailed quotation

The information behind a useful quotation

You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.

Example of flush doors and concealed frames in Barcelona

The space

Photographs and approximate dimensions show the available area and nearby doors or services.

Your priorities

Explain what you need the furniture to do and what is missing now.

Your references

Send a few examples and point out the details you like.

Timing and access

Tell us the address, intended date and any work taking place before fitting.

From early guidance to a final figure

From enquiry to a confirmed proposal

01First review

We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.

02Detailed quotation

The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.

Send what you already have. We can identify the next useful photograph, measurement or decision.

Send photographs and dimensions → Send via WhatsApp

Illustrative material detail for flush doors and concealed frames

Materials and details

Choose the specification as a whole

A surface, its supporting board, edges and hardware need to work together.

StructureSupports and thicknesses depend on dimensions and the intended load.

FinishColour and texture are considered alongside cleaning and exposure.

HardwareHinges, runners and mechanisms are selected for their intended use.

JunctionsEdges, fixings and access panels are resolved before manufacture.

Product-specific performance and care instructions are checked against the selected specification.

Before deciding

Flush door questions

Can one be fitted in an existing wall?＋

That depends on wall construction, thickness, plumb and covering. We assess the changes required first.

Will it be completely invisible?＋

Joints and an opening method remain. They can be visually integrated but do not physically disappear.

Can it carry the wall panelling?＋

Yes, when the added weight and hinge movement are defined with the panel layout.

Start with the details you have

Show us the whole wall and opening

Photograph both sides, the floor and skirting. Tell us which finish should continue and the door swing.

01 We review the scope of your idea
02 We identify dimensions still needed
03 Materials and fitting are specified before you order

Name for our reply * Phone with WhatsApp * Email, if you prefer Type of furniture * Approximate budget Preferred contact language * What needs to fit or change? Add room photos or a plan Choose up to 8 JPG, PNG, WEBP, HEIC or PDF files (40 MB per file; 120 MB altogether)

Send by WhatsApp

Frame, leaf and junctions follow a survey of the existing wall.

Flush doors: the wall sets the detail

A flush door needs leaf, frame and wall finish to be coordinated. The result depends on the substrate as much as on the door.

Wall thickness, swing direction, skirting and continuity of the surface are checked before the design is closed.

Concealed hinges and latches must remain adjustable after fitting. We agree tolerances and maintenance for the chosen system.

Send an opening plan and photographs of the wall, during work or finished. Each junction is surveyed before manufacture is confirmed.