Base checked
Flatness and conditions are reviewed before laying.
MMV Studio
Parquet and timber flooring in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
Before choosing oak, herringbone or laminate, look at the floor below. Doors, moisture, level changes and junctions with kitchens or bathrooms affect the specification as much as the colour.
Designed for your space
A new floor begins with the subfloor
A timber sample means little if a door will catch after fitting. We measure levels and inspect the base, thresholds and joints before agreeing a format and finish.
Levels measured
Doors, skirtings and thresholds are considered together.
Sample at home
Colour is compared in the room’s own light.
Junctions planned
Floor changes and steps are detailed.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Continuity meets real interruptions
Herringbone changes the pattern of a room; long boards emphasise another direction. Neither solves a poorly placed joint or an unfinished step.
Timber parquet
Species, construction and finish follow expected use.
Laminate
Wear and maintenance are compared for that room.
Transitions
The link to tile and other levels is planned.
Stairs
Tread, riser and edge are detailed as one assembly.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of parquet and timber flooring
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Natural oak flooring in a living roomBoard direction is compared with entrances and daylight.
Herringbone parquet in a classic apartmentHerringbone needs a clear setting-out line before cutting.
Chevron parquet flooringThe pattern angle follows the actual room limits.
Wide-plank timber flooringLong boards require planned joints and edges.
Laminate flooring for a controlled budgetLaminate follows use and upkeep, not colour alone.
Engineered timber beside an open kitchenA kitchen junction needs compatible heights and materials.
Parquet repaired to match existing flooringA repair must allow for shade and thickness differences.
Timber flooring continued onto stairsTread and edge are detailed together on every step.
Flooring compatible with underfloor heatingCompatibility follows the specific floor and heating system.
Transition between timber and ceramic flooringThe trim follows the levels of both surfaces.
Diagonal timber flooring in a narrow apartmentA diagonal layout changes cuts and a corridor’s appearance.
Parquet with a border in a historic homeDocument what must remain in an older property.
Dark walnut flooringDark walnut is sampled beside existing furniture and light.
Whitewashed timber flooring for a coastal homeA pale sample may read differently next to the current floor.
Durable timber flooring for a commercial interiorCommercial wear informs finish and cleaning.
Premium selected-oak parquetBoard selection and laying pattern account for part of the quote.
Three ways to approach the specification
Choose after measuring
Laying pattern and material construction are judged against the real plan.
Continuous01
Boards through the home
Direction and edges follow daylight and entrances.
- Available length
- Thresholds planned
- Skirting selected
Pattern02
Herringbone or defined geometry
The layout is centred against the room limits.
- Axis set
- Cuts counted
- Doors resolved
Mixed03
Beside another surface
The joint suits use and differing levels.
- Heights compared
- Suitable joint
- Edge finish
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Before replacing a floor
Can it go over the current floor?＋
That depends on the system, flatness, moisture and available height; we check before promising it.
What happens to the doors?＋
Final floor height is measured and any needed adjustments are stated in the proposal.
Can it work with underfloor heating?＋
Compatibility must be verified against the installed system and selected floor specification.
Start with the details you have
Send floor and junction photographs
Include doors, steps, kitchen and points where the material changes. A plan with rough areas helps us prepare a visit.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Parquet and flooring: the subfloor comes first
Before choosing pattern or colour we inspect level, moisture and the existing floor. Installation is specified only when the base suits the intended system.
Doors, skirting and fixed furniture need compatible expansion gaps and trims. We plan those junctions before installation begins.
Room use, cleaning and maintenance are compared with the chosen product’s properties rather than assuming all materials behave alike.
Send rough floor area, photographs and property details. A visit establishes preparation, material, fitting method and cost.