Useful depth, not headline depth
Subtract the back, doors and possible tracks to see what remains for hanging rails and drawers.
MMV Studio
Fitted wardrobes in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
A fitted wardrobe should not lose half a shelf behind an uneven wall. We measure the opening at several points and plan doors, interiors and scribed pieces around the space that exists.
Designed for your space
The recess matters more than the front
Interiors and doors are selected against net depth, not the outer recess dimension. Uneven walls, access panels and special scribes are resolved before final pricing.
Walls measured at several points
One recess can vary in width from floor to ceiling; gaps and finishing pieces are planned in the drawing.
Room to open
Doors, bed, radiator and walkway are drawn together before choosing sliding or hinged fronts.
Storage for actual belongings
Long clothes, shoes, cases and bedding need different heights and access.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of fitted wardrobes
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Wall-to-wall white frontsA built-in wardrobe with plain doors and long handles beside a traditional balcony
Natural oak fitted to the full recessContinuous grain and a precise top scribe integrate storage into the bedroom
Walnut with smoked glassA softly lit display bay paired with full-depth closed storage
Green lacquer with an open nicheA fitted composition alternating tall doors with a central oak bookcase
Built-in wardrobe beside the balconyWarm full-height fronts with side fillers tailored to an urban Spanish home
Fitted storage beneath a sloping roofMade-to-measure doors follow the pitch while retaining useful capacity
Illuminated niche overlooking the coastPale oak drawers and open shelving sit between full-height closed modules
Designed around an existing columnOlive lacquer and a central recess resolve an irregular wall without disguising it
Shallow storage for a corridorA reduced-depth built-in wardrobe keeps the passage clear while using the available wall
Classic doors for an older propertyFramed fronts, a scribed cornice and a light finish complement the original floor
Smoked glass with internal lightingA premium walnut scheme reveals hanging rails, shelves and drawers through the glass
Integrated storage for a child's roomSage modules include an accessible bookcase and low drawers for everyday use
Storage bridge above the bedTop cupboards, side wardrobes and oak bedside niches form one fitted composition
Entrance wardrobe with a benchBlue-grey fronts conceal coats and shoes around an open oak seating niche
Premium continuous walnutSelected natural veneer and slim brass pulls create a complete bedroom storage wall
A home office concealed within storageAn oak desk and work shelves are integrated between closed wardrobe modules
Before choosing
Six ways an opening can change the design
An existing niche, full wall and sloping ceiling do not call for the same component plan. These checks may change the solution.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Between walls | Uses an existing recess | Measure width at top and bottom, diagonals and depth on both sides. |
| Across a wall | Combines hanging, drawers and overhead storage | Plan side infills and divide modules so they can enter the flat. |
| To the ceiling | Adds less frequently used storage above | Allow fitting clearance and a practical way to reach the top. |
| Beside a column | Allows different uses at different depths | Keep drawers and hanging rails out of the area too shallow for them. |
| Below a slope | Follows a roof line | Check each door swing and separate hanging height from low storage. |
| Around services | Keeps inspection points or ventilation in place | Decide how access remains possible without dismantling the whole cabinet. |
Written scope
Decisions that shape this project
A proper survey prevents capacity being lost to one misleading measurement.
Recess surveyed at several points
Width, height and depth are checked high and low rather than assuming the wall is straight.
Interior within usable depth
Backing, tracks and doors are accounted for before rail or drawer depth is promised.
Scribes that absorb differences
Sides follow measured conditions without twisting the front to match an uneven wall.
Existing access retained
A service hatch or socket is recorded and kept reachable where necessary.
Specified backing
Its presence and thickness matter because both change the usable interior depth.
Side scribe
Width follows measured wall deviation and the frontage finish.
Damp, an unresolved wall or relocated services are assessed and agreed separately before manufacturing.
Practical answers
Questions about the fitted recess
Can the whole recess depth be used?＋
Not always. The back, fronts, tracks and uneven walls reduce internal depth. We establish it after measurement.
Can an access panel stay behind it?＋
It must be identified before design. Access for necessary maintenance is planned.
Hinged or sliding doors?＋
Consider free space, leaf width and how much of the interior should be accessible at once.
Must the walls be straight?＋
No, but their deviation must be measured for scribed pieces and working gaps.
Are my measurements enough for a quote?＋
They support an initial guide; manufacturing sizes are checked at the property.
Start with the details you have
Show us the whole recess
Photograph floor, ceiling, sides and space in front. Add rough sizes and what clothing or belongings need to fit. We can then assess the idea before measuring.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Fitted wardrobes: make the front fit the actual recess
A building recess seldom measures the same at top and bottom. We take readings in several places so doors line up without strain or uneven gaps.
Before deciding usable depth, we inspect pipes, electrical boxes and access panels. If they must remain reachable, the opening method goes into the drawing.
Where the existing carcass is sound, we may renew interiors and doors separately. Its condition, dimensions and fixings decide, rather than appearance alone.
Send pictures of the recess both open and closed, plus a list of what you intend to store. The final proposal follows an on-site check of the structure.