Bed and proportions
Mattress width, bed base and bedside tables establish the overall composition.
MMV Studio
Bespoke headboards in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
Bespoke headboards in Barcelona, coordinated with the bed, bedside tables and lighting. The wall design brings support surfaces and connections together without crowding the bedroom.
Designed for your space
Start with the bedroom wall, not a catalogue picture
An outlet behind the bed, a radiator at one side or bedside tables you want to keep can change the entire design. We survey the wall and mark what must stay accessible before selecting a panel finish.
Lighting and sockets
Switches, wall lights and outlets are positioned in the design; electrical work is identified separately.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Design the bed wall around its actual dimensions
The bed width is only a starting point. Mattress height, nearby doors and where you read or charge a phone matter just as much.
Keep existing bedside furniture
We size the headboard and its edges around bedside tables that already work for you.
Take the panel across the wall
Where space allows, the headboard can extend behind both sides of the bed. Joints and access points are settled before production.
Place reading lights properly
We mark lights and switches where each person uses them. Electrical work is specified separately where required.
Handle an uneven wall
Skirting, an out-of-square corner or a shutter box needs a drawn junction rather than a guessed site cut.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke headboards
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Storage without crowding the roomBefore adding under-bed drawers, check they open beside the bedside tables and door.
Pieces that belong togetherHeadboard, bedside units and wardrobe can relate without repeating one finish everywhere.
Drawers beneath the mattressAn under-bed storage base changes bed height, so check everyday access.
Using the headboard wallOverhead cupboards need a depth that remains comfortable when sitting up in bed.
One room, several usesPlace sockets and task lighting before finalising cabinets in a bedroom with a desk.
Oak and bedside lightingEach reading light should have a convenient switch without exposed cables behind the bed.
Deeper walnut tonesA sizeable sample against the flooring helps judge how much dark timber suits the room.
Fronts beneath a sloping roofUsable height varies along the wall, with lower sections often better suited to drawers.
Desk beside the balconyA desk near daylight must leave the window and shutter free to open.
Light bedroom texturesCane and oak feel airy, but visible storage still needs planning.
A column beside the wardrobeCabinetry can absorb the projection without giving every adjacent unit the same shallow depth.
A room ready for guestsA folding desk can serve daily work and clear the room when someone stays over.
Slats across the wallMark lighting points and bedside unit positions before installing full-width slats.
Recesses in the headboardA space for a book and phone can replace deep bedside cabinets where circulation is tight.
Upholstery with floating unitsOpen floor below bedside cabinets makes cleaning easier and keeps the wall visually lighter.
Mineral finishes with timberPosition reading lights so one side of the bed is lit without disturbing the other.
Three ways to approach the specification
Choose how much of the bed wall to build
The wall and what you need it to do determine the scope.
Simple01
One well-sized piece
A clean headboard defines the bed without covering the whole wall.
- Width set against the bed
- Edge and fixing specified
- Existing tables retained
Joined02
Headboard with side supports
Bedside units and panel are planned together so their heights and reach make sense.
- Each side measured separately
- Outlet positions recorded
- Storage based on your belongings
Full wall03
Panel and lighting in one plan
Junctions, access points and lighting positions are coordinated with the electrician.
- Joint and edge drawing
- Services kept accessible
- Trades itemised separately
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Questions about a fitted headboard
Must the existing sockets be moved?＋
Not necessarily. We locate them in relation to the bed and tables first. Any relocation is specified with the electrician.
Can I keep my bedside tables?＋
Yes. Send their dimensions and photos so the headboard meets them neatly and their drawers remain usable.
How is a large panel fixed?＋
We decide after checking the wall and access to the room. Fixings and any service openings are detailed before manufacture.
Start with the details you have
Show us the wall behind your bed
Send a photo, bed width, bedside table dimensions and socket positions. We can use those references to discuss a first layout.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke headboards: bed, lights and sockets
We draw a headboard with the actual bed and bedside units. A panel that looks balanced on an elevation may cover a switch or put a lamp out of reach.
Integrated lighting needs agreed control positions, wiring routes and maintenance access before the panel is closed.
Upholstery, veneer and lacquer differ in cleaning and resistance to rubbing. Fixing to the wall or to furniture also affects the choice.
Send mattress width, intended height and photographs of electrical points. We check wall support and final room measurements before making it.