Designed for the space
Dimensions and layout are checked against the room and your priorities.
MMV Studio
Bespoke master bedroom furniture in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
Bespoke master bedroom furniture in Barcelona. Each person’s storage, access to both sides of the bed, lighting and sockets are reviewed. The scheme can coordinate wardrobe, headboard and bedside units.
Designed for your space
One bedroom, two people and different routines
One person may read late while the other gets up early. The layout should let both reach clothes, turn on a light and open a drawer without getting in each other’s way.
Choices explained
We compare suitable materials and hardware before the specification is approved.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Set bed, wardrobe and circulation before finishes
We begin with room dimensions and the furniture you are keeping. Storage, lighting and bedside support then follow how each side is used.
Reach both sides of the bed
We test the route with doors and drawers open rather than relying on an empty floor plan.
Shared wardrobe
Rails, shelves and drawers follow actual clothes and their owners; the two halves need not match.
Headboard and bedside units
Mattress height, sockets and reading habits determine where surfaces and lights belong.
Furniture staying in the room
If the bed or chest remains, its true dimensions govern the new fitted pieces.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke master bedroom furniture
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Storage without crowding the roomBefore adding under-bed drawers, check they open beside the bedside tables and door.
Pieces that belong togetherHeadboard, bedside units and wardrobe can relate without repeating one finish everywhere.
Drawers beneath the mattressAn under-bed storage base changes bed height, so check everyday access.
Using the headboard wallOverhead cupboards need a depth that remains comfortable when sitting up in bed.
One room, several usesPlace sockets and task lighting before finalising cabinets in a bedroom with a desk.
Oak and bedside lightingEach reading light should have a convenient switch without exposed cables behind the bed.
Deeper walnut tonesA sizeable sample against the flooring helps judge how much dark timber suits the room.
Fronts beneath a sloping roofUsable height varies along the wall, with lower sections often better suited to drawers.
Desk beside the balconyA desk near daylight must leave the window and shutter free to open.
Light bedroom texturesCane and oak feel airy, but visible storage still needs planning.
A column beside the wardrobeCabinetry can absorb the projection without giving every adjacent unit the same shallow depth.
A room ready for guestsA folding desk can serve daily work and clear the room when someone stays over.
Slats across the wallMark lighting points and bedside unit positions before installing full-width slats.
Recesses in the headboardA space for a book and phone can replace deep bedside cabinets where circulation is tight.
Upholstery with floating unitsOpen floor below bedside cabinets makes cleaning easier and keeps the wall visually lighter.
Mineral finishes with timberPosition reading lights so one side of the bed is lit without disturbing the other.
Three ways to approach the specification
Where to begin with the bedroom
Every piece need not be made at once. Start with what affects everyday use most.
Layout01
Bed and movement
The bed position sets the remaining space for opening a wardrobe and crossing the room.
- Bed and base measured
- Door swings on the plan
- Windows and radiators clear
Clothes02
Storage for two
We count garments and accessories before deciding the interior split.
- Hanging heights checked
- Drawers based on use
- Reach without blocking passage
Finish03
Headboard and side furniture
Visible pieces can share finishes without having identical dimensions or functions.
- Support on each side
- Lighting suited to routines
- Samples for visible finishes
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Planning a bedroom for two
Could we order only the wardrobe now?＋
Yes. We can record relevant dimensions and finishes if you later want matching bedside pieces.
Must both sides be symmetrical?＋
No. One person may need drawers while the other wants a clear surface. The design can still look related.
When should reading lights be decided?＋
Before finalising headboard dimensions and electrical points. Installation is coordinated with the appropriate specialist.
Start with the details you have
Share the bedroom plan if you have one
Add photos, the bed dimensions and the pieces you want to keep. Tell us what causes trouble now: movement, storage or light.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Double bedrooms: plan for two different routines
Before dividing the wardrobe, we ask what each person stores and when they use the room. Interiors may differ on each side even with one continuous front.
Bedside units should keep sockets and lights within reach without narrowing passage. Drawers and wardrobe doors are checked in their open positions.
Headboard, chest and storage can share a material language without repeating the same finish on every surface.
Send bed size, photographs from door and window, and a list of furniture staying. The survey fixes widths, depths and electrical positions.