Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Ciutat Vella, Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
In Ciutat Vella, furniture must fit the room and make it through the building. Before fixing a kitchen or wardrobe design, we check the route from the entrance, stair turns and the condition of the wall that will receive the units.
Designed for your space
Bespoke furniture designed for your home in Ciutat Vella
In Ciutat Vella, furniture must fit the room and make it through the building. Before fixing a kitchen or wardrobe design, we check the route from the entrance, stair turns and the condition of the wall that will receive the units. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Ciutat Vella
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
How we work in Ciutat Vella
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Wardrobe between uneven walls and other solutions
One room or several: start with the furniture you need.
Wardrobe between uneven walls
We survey the recess at several points and draw the side scribes before setting door widths.
Kitchen with restricted circulation
We test drawers, refrigerator and cupboard doors open together; usable space matters more than extra units.
Living furniture in transportable parts
A continuous elevation can be built in sections that pass through the entrance and join inside the flat.
Furniture for commercial premises
Counters and shelves are planned around customer movement, existing services and the actual delivery route.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Ciutat Vella
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
What the property survey must establish
The actual property determines what needs to be checked.
Entrance and stairs
Photograph the doorway, lift if present and any turn that a long component must negotiate.
Walls out of square
We take widths high and low, plus depths; one measurement can conceal a meaningful difference.
Door clearance
The plan shows which fronts and drawers need free space in front of the new furniture.
Access to services
Sockets, valves and inspection panels are located so they remain reachable after installation.
Three ways to approach the specification
Choices that change the scope
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Component sizes start with the actual route into the flat and the wall measurements.
- Route from the entrance
- Parts sized for delivery
- Wall surveyed at several points
Personal detail02
Refine the visible finish
Finish decisions then focus on visible fronts rather than hidden surfaces with little effect on the room.
- Frontage viewed in the room
- Edges beside circulation
- Care suited to actual use
Special requirements03
Resolve the unusual details
Special joints and scribes are priced once assembly location and transport are known.
- Assembly inside the flat
- Service points kept reachable
- Fixing suited to substrate
A detailed quotation
What we need to quote for your bespoke furniture in Ciutat Vella accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Ciutat Vella
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Local questions
Questions before we specify the work
Can a large unit be installed up a narrow staircase?＋
We assess the route before specifying components. Where necessary, the unit is split and joined inside.
Is one recess measurement enough?＋
Not where floors slope or walls are uneven. Several points are checked and each scribe is recorded.
Can the existing floor stay?＋
Often, subject to the design and fixings. Tell us what floor remains so we can plan protection and junctions.
Which photographs help with a Ciutat Vella quote?＋
Include the room, entrance, stairs or lift, floor level and any services that must remain accessible.
Start with the details you have
Tell us about the room
Send the address in Ciutat Vella, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke furniture in Ciutat Vella: survey the building as well as the room
For a property in Ciutat Vella, a photograph of the recess does not tell us how large the components can be. We also need to see the entrance, stairs or lift and the route to the room.
Where walls are uneven, we measure at several points. A straight front may need a different scribe at each end; that detail belongs on the drawing before materials are cut.
The contents determine the layout inside, rather than the number of doors across the front. For a kitchen or wardrobe we also check opening space and existing services.
Send the address, floor, room photographs and rough dimensions. We will confirm coverage and explain what the survey must establish before a final manufacturing and fitting quote.