Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Sant Andreu, Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
For bespoke furniture in Sant Andreu, we begin with what should be visible and what you would rather store away. That choice determines whether a wall needs cupboards, shelves or both; around a corner, the doors must also remain usable.
Designed for your space
Bespoke furniture designed for your home in Sant Andreu
For bespoke furniture in Sant Andreu, we begin with what should be visible and what you would rather store away. That choice determines whether a wall needs cupboards, shelves or both; around a corner, the doors must also remain usable. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Sant Andreu
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
How we work in Sant Andreu
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Display and storage in the living room and other solutions
One room or several: start with the furniture you need.
Display and storage in the living room
Chosen books or objects stay visible while the rest sits behind doors.
Corner wardrobe
Access to the junction is studied before claiming capacity in a hard-to-reach depth.
Kitchen around a recess
Services and door swing matter more than the apparent width of the wall.
Storage bench
Seat and drawers are sized against available passage and their intended contents.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Sant Andreu
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
What the property survey must establish
The actual property determines what needs to be checked.
Items to display
We separate display, archive and daily use before dividing open and closed spaces.
Where two fronts meet
Open leaves are drawn to make sure the corner does not become trapped.
Wall fixing
The actual substrate determines what can be hung and how it is anchored.
Delivery path
Building doors, lift and floor level are checked before unit sizes are fixed.
Three ways to approach the specification
Choices that change the scope
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
We begin by dividing what will be displayed from what belongs behind doors.
- Items selected for display
- Concealed storage defined
- Corner within reach
Personal detail02
Refine the visible finish
Shelves and fronts receive closer attention where loads or corner access demand it.
- Shelves matched to weight
- Openings without clashes
- Easy-care inner surfaces
Special requirements03
Resolve the unusual details
For wall-hung pieces, substrate and anchors are checked before the quote is settled.
- Wall substrate identified
- Anchors checked
- Junction between units planned
A detailed quotation
What we need to quote for your bespoke furniture in Sant Andreu accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Sant Andreu
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Local questions
Questions before we specify the work
Is all corner storage usable?＋
Only when the opening lets you reach the back. We compare theoretical volume with practical access.
Can shelves and doors be combined?＋
Yes. The division follows display, concealed storage and the loads each shelf will carry.
Can a heavy composition be wall-hung?＋
We check wall construction and load first, then specify the structure and fixing.
What should I send from Sant Andreu?＋
Wall and corner photographs, intended contents, rough dimensions and access details for the flat.
Start with the details you have
Tell us about the room
Send the address in Sant Andreu, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke furniture in Sant Andreu: from recess to routine
Before choosing cupboards, shelves or a mixture, we ask what the wall must store and what should stay on view. The function guides the division.
For a corner unit, we test what happens when the neighbouring doors open. A deep corner offers little value if its contents can only be reached through a narrow opening.
In Sant Andreu we check dimensions, delivery route and fixing points at the individual property. A reference photograph cannot settle the component drawing.
Tell us the room, address and priorities, then add photographs and rough dimensions. We can explain which layout is worth exploring and when to measure.