Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Horta-Guinardó, Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
If a room in Horta-Guinardó changes height or access affects delivery, those measurements shape the component plan. A wardrobe beneath a sloping roof needs heights at several points; a large assembly may need joining inside the property.
Designed for your space
Bespoke furniture designed for your home in Horta-Guinardó
If a room in Horta-Guinardó changes height or access affects delivery, those measurements shape the component plan. A wardrobe beneath a sloping roof needs heights at several points; a large assembly may need joining inside the property. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Horta-Guinardó
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
How we work in Horta-Guinardó
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Wardrobe under a sloping plane and other solutions
One room or several: start with the furniture you need.
Wardrobe under a sloping plane
Rails sit where standing height permits; low sections can take shelves or drawers.
Under-stair furniture
Depth and height vary at every step, so the frontage follows a measured section.
Kitchen on an uneven base
Level, support and services are checked before setting the worktop and cabinet positions.
Storage in joined components
The scheme is designed to pass through the building with planned junctions at assembly.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Horta-Guinardó
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
What the property survey must establish
The actual property determines what needs to be checked.
Heights at several points
A dimensioned section describes the slope better than one maximum height.
Route to the flat
Floor level, lift size and stair width guide the largest practical component.
Base and wall
We record unevenness and substrate before selecting fixings and finishing strips.
Nearby access panels
Sockets and hatches must remain usable after the frontage is installed.
Three ways to approach the specification
Choices that change the scope
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Usable height is assessed section by section so inaccessible compartments are not built.
- Dimensions beneath slope
- Rails in taller zone
- Shelves in lower zone
Personal detail02
Refine the visible finish
Visible fronts can remain orderly even when carcasses are divided for delivery upstairs.
- Components sized for lift
- Joints planned on drawing
- Level supporting base
Special requirements03
Resolve the unusual details
Work beneath slopes is specified after measuring angles, fixings and edges, rather than from a photograph.
- Angles surveyed on site
- Cut edges finished
- Fixings after substrate check
A detailed quotation
What we need to quote for your bespoke furniture in Horta-Guinardó accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Horta-Guinardó
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Local questions
Questions before we specify the work
How is a sloping ceiling surveyed?＋
We measure heights at known intervals and establish usable depth before dividing the units.
Can a wardrobe arrive fully assembled?＋
That depends on the route. Otherwise we plan transportable parts and their final connection.
Will any wall take the same fixing?＋
No. Substrate and expected load both need checking before anchors are chosen.
Which photographs help here?＋
Show the full slope, floor, side junctions and the route from the building entrance.
Start with the details you have
Tell us about the room
Send the address in Horta-Guinardó, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke furniture in Horta-Guinardó: heights and access
If the room has a sloping ceiling or changing heights, one measurement cannot describe the recess. We take dimensions at several points to place rails, shelves and drawers where they fit.
How a piece enters the property matters as much as its finished shape. In Horta-Guinardó we ask for floor level and lift or stair details so components can be assembled inside.
Before closing a front we identify inspection panels and sockets that must remain accessible. The visible finish is chosen after the support, use and maintenance requirements are clear.
Send room and access photographs, the address and rough dimensions. That gives us a basis for an initial proposal and a measured survey if the project is suitable.