Real footwear heights
Boots and flat shoes do not need one standard spacing.
MMV Studio
Custom shoe storage in Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
Tall boots, trainers and everyday shoes need different openings. We count pairs by type and consider airflow before choosing shelves or tilt-out fronts.
Designed for your space
Design shoe storage with your shoes in mind
Trainers, boots and heels need different heights. We measure representative pairs and the available recess before choosing level shelves, angled racks or pull-out trays.
Walking route kept
Doors and drawers are tested in the open hallway.
Cleaning considered
Trays and surfaces allow sand or dust to be removed.
Airflow assessed
Enclosure follows location and the shoes being stored.
Our process
How we work, step by step
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
The largest pair sets the compartment
At an entrance, the unit should also allow someone to put shoes on and reach daily pairs without opening everything.
Adjustable shelves
Spacing can change as the mix of footwear changes.
Shallow tilting front
It may work in a narrow hall when its opening still leaves passage.
Pull-out tray
It brings pairs at the back of a deep cabinet forward.
Shoe bench
It offers a seat when its drawers clear the entrance door.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of custom shoe storage
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Tilting front in a hallwayThe cabinet is shallow but its open door still uses walking space.
Shoes beneath a seatBench height includes the cushion and space for the footwear.
Shelves inside a wardrobeFootwear stays apart from clean clothes and hanging rails.
Trays that pull forwardPairs are visible without leaning into the back of the cabinet.
Very narrow columnAngled shelves follow the length of the largest shoe.
Drawers below stairsHeight changes at every section, so pairs are assigned by size.
Turning mechanismThe corner helps only if the system has room to rotate and be serviced.
Woven door frontAir movement is considered together with cleaning the shoes.
Entrance for a familyBoots, trainers and children’s footwear need different openings.
Shelves within reachDaily pairs are easier to choose when they are not all stored low down.
A dividing cabinetTwo different faces hold shoes without darkening the entrance.
Pale oak and woven frontSand and moisture call for a base that cleans easily.
Traditional frontageMouldings and hardware should not block pairs at the back.
Guest apartment storageWashable trays simplify checking and cleaning between stays.
Island with shoe displaysPairs remain visible at the ends, with accessories in central drawers.
Walnut and glassLighting presents footwear without making the shelves difficult to clean.
Three ways to approach the specification
Store by frequency and size
Not every pair needs to be on show or at the same height.
Daily01
Shoes near the door
Regular pairs sit within easy reach without excessive bending.
- Space easy to clean
- Passage checked
- Seat if it fits
Collection02
More pairs in a cabinet
Trays and divisions reveal contents without removing one pair to reach another.
- Depth measured
- Adjustable shelves
- Boots kept apart
Family03
A place for each person
Assigned compartments prevent mixing and clear the entrance floor.
- Different sizes
- Baskets or drawers allocated
- Fronts for frequent use
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Before deciding
Questions about bespoke shoe storage
How many pairs will fit?＋
That depends on sizes and footwear types. We calculate using representative pairs, not shelf count alone.
Are ventilated doors essential?＋
The answer follows location, use and cabinet conditions. Shoes should also be dry and easy to clean before storage.
Could one fit a very narrow hall?＋
A shallow front may work if the door or tray leaves safe walking space when open.
Start with the details you have
Count the pairs and include tall boots
Photograph the entrance or dressing area, measure free width and depth, and note the footwear taking most space.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke shoe storage: pairs, heights and ventilation
Shoes do not all take the same space. We count pairs, boots and everyday footwear before choosing flat or angled shelves and drawers.
In a narrow entrance, the remaining passage with the cabinet open matters. A shallow unit may work, but shoe sizes and orientation need checking.
Airflow, cleaning and finishes resistant to scuffs are part of the design. A seat for putting on shoes can be incorporated where space allows.
Send a photograph of the spot, dimensions and approximate number of pairs. We will assess capacity without obstructing movement.