Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Sarrià-Sant Gervasi, Barcelona
We can assist you inEspañolEnglishDeutschРусский
Designed for the space, specified for use and fitted on site
For work across several rooms in Sarrià-Sant Gervasi, it helps to approve the layouts before comparing finishes. Lacquered and veneered fronts can relate visually, but the quote should also explain substrate, edge, hardware and upkeep for each piece.
Designed for your space
Bespoke furniture designed for your home in Sarrià-Sant Gervasi
For work across several rooms in Sarrià-Sant Gervasi, it helps to approve the layouts before comparing finishes. Lacquered and veneered fronts can relate visually, but the quote should also explain substrate, edge, hardware and upkeep for each piece. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Sarrià-Sant Gervasi
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
How we work in Sarrià-Sant Gervasi
These steps connect the first estimate to the final fitting. Measurements and specification come before the binding price.
Initial estimate
Share the address, room photos, approximate measurements and the furniture you have in mind. We outline a price range to be checked against the measured space.
Measured survey
At the property we record the relevant dimensions, services and wall conditions. We also check how the pieces can enter the building.
Design, when required
If drawings or a design are needed, we develop them after the survey. The design work is included at no extra charge when you order us to manufacture to that project.
Detailed quotation
With the layout and specification agreed, we set out materials, fittings, delivery, installation and the final amount in writing.
Approval and deposit
You confirm the proposal and pay the deposit stated in the quotation. This authorises the production order.
Workshop production
We cut, finish and prepare the components according to the approved drawings and dimensions.
Fitting on site
The team delivers and assembles the furniture, then adjusts fronts, hinges and visible joints.
Review with you
Before closing the job, we go through doors, drawers and finishes together and record anything that needs a final adjustment.
Your project starts here
Give every centimetre a purpose.
I'm Joaquín Pardo. Show me the awkward corner, column or wall that is limiting your room. We can start with what you need to store and explore ways to use the space without crowding it.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Bookcase with known loads and other solutions
One room or several: start with the furniture you need.
Bookcase with known loads
Support spacing follows the books, objects and equipment intended for each level.
Dressing room with lighting
Rails, drawers, power points and later access to components are planned together.
Coordinated kitchen and dining
Proportions and colours can connect while cooking surfaces receive the specification their use requires.
Furniture across a home
Each room has its own purpose; the project shares principles without requiring identical pieces.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Sarrià-Sant Gervasi
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
What the property survey must establish
The actual property determines what needs to be checked.
Layout before finish
Door action, capacity and circulation are approved before surface samples are compared.
Load on each shelf
Books and decorative objects need different spans and supports.
Lighting connections
Power, switches and service access are located for later replacement.
Room-by-room breakdown
The proposal distinguishes materials and components so alternatives can be compared.
Three ways to approach the specification
Choices that change the scope
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Each room’s purpose is agreed so different pieces can share a coherent direction.
- Purpose of each room
- Layout approved first
- Load for each shelf
Personal detail02
Refine the visible finish
Samples are compared where they will be installed, with every finish substrate identified.
- Samples beside flooring
- Substrate of every front
- Edges and hardware named
Special requirements03
Resolve the unusual details
Lighting, hardware and unusual loads are specified piece by piece rather than as a standard package.
- Lighting specified per piece
- Access for maintenance
- Quote broken down by room
A detailed quotation
What we need to quote for your bespoke furniture in Sarrià-Sant Gervasi accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Sarrià-Sant Gervasi
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
Local questions
Questions before we specify the work
Can one finish run through the house?＋
Yes, once its suitability for each use and appearance in each room have been checked.
Is wood veneer solid timber?＋
No. Veneer is a thin natural layer on a substrate; the quotation should specify both.
How is a bookcase built for heavy books?＋
Spans and supports follow estimated load, with suitable thickness and fixings.
What should I send for several rooms?＋
Photographs, rough dimensions, address and a separate list of needs for each room.
Start with the details you have
Tell us about the room
Send the address in Sarrià-Sant Gervasi, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 We review the scope of your idea
- 02 We identify dimensions still needed
- 03 Materials and fitting are specified before you order
Bespoke furniture in Sarrià-Sant Gervasi: specify the finish
For a project covering several rooms, we approve each layout first. Samples then help decide whether finishes should match exactly or simply sit well together.
A lacquered door and a timber-veneered one may use the same core or different constructions. The quotation should identify the board, surface, edge and hardware of each component.
For a bookcase, kitchen or dressing room we check load, openings and care. Lighting and equipment need planned connections and a way to reach them later.
Send the Sarrià-Sant Gervasi address, photographs, rough dimensions and a room list. We will tell you what information is missing before a detailed proposal.